What do HVAC ratings mean?

August 23, 2018

If you are looking for a new heating and cooling system, there are a lot of factors to think about. Is it the correct size for your home? Is it energy efficient? Will it work with your budget? Will the unit be quiet enough for your home? Will it be beneficial for your indoor air quality? You have a lot to think about when considering the best solution. On top of all the inquiries you have, some HVAC knowledge seems just out of reach. The acronyms and shorthand that industry professionals already know can be confusing for the average person. Lucky for you, the experts at Gillman Heating and Air are breaking down the system ratings you need to know before making a purchase:

Annualized Fuel Utilization Efficiency (AFUE): This efficiency rating is a ratio that associates how much of the fuel you use in your furnace to the amount turned into useable heat. The higher the percentage of heat used, the better the system rating.

If your system has an AFUE rating of 85, that means the system makes 85 percent of the fuel used into useable heat. If you are looking for a highly efficient system, you’ll want one that has an AFUE of 90 or higher. Lennox offers residential furnaces with ratings up to 98.7—the highest in the industry.

Seasonal Energy Efficiency Ratio (SEER): The SEER rating is used to measure both heat pumps and air conditioners. Much like AFUE, this ratio compares how much of the fuel used to power a home comfort system is converted to cooling output. The higher the SEER rating, the more efficient your system is operating.

Minimum SEER ratings change between regions. A high efficiency model that provides more energy savings in the long run will generally be a little more expensive. Lennox offers air conditioners with SEER ratings up to 26—another industry leading rating.

Heating Seasonal Performance Factor (HSPF): Do you own a heat pump or plan to shop for one? This is the heating efficiency rating you need to know. A higher rating indicates a more efficient heat pump. If you want to find a solution that’s ENERGY STAR® efficient, then look for a model with a rating above an 8.2—as well as a SEER rating above 12.

Minimum Efficiency Reporting Value (MERV): Air filters have holes that permit air and particles to circulate around the house. MERV takes a look at the size of the holes. The higher the rating, the smaller the holes in the filter—and the fewer debris particles that enter into your home. If you’re wanting a more efficient filter, find one with a MERV rating of 10 or higher.

Air filters are critical to the quality of air in your home. Make sure to find the rating that works with your home, with your system and change the filter on a consistent basis.

Finding an HVAC system that fits with your home, your energy efficiency needs and your desired comfort starts with understanding ratings. If you’re ready to find the answer for your home comfort, or you have more questions about system ratings, call the pros at Gillman Heating and Air. You can reach us at 478-202-3076 We’ll work with you to find the best solution and get to the bottom of all your questions.